Patton electronic user manual Step #6- 9 for Model 1000RPEM-V

8.Replace the spare fuse with one of the appropriate size and rating and close the drawer.

9.Re-install the power cord.

(Step #6- 9 for Model 1000RPEM-V)

6.Using a small screwdriver, push in lightly and turn counter clockwise to open the compartment. The top will pop open with the fuse attached.

WARNING! Replace the fuse only with one that has the correct voltage and current rating for the voltage setting of the unit (the proper fuse ratings will be marked on the rear panel of the unit*). Replacing the fuse with one having an incorrect rating can result in a fire!

7.

If the active fuse appears to be blown, remove it from the front container. Note the size and rating of the blown fuse before discarding (*120V = TO.4; 240V = TO.2).

8.Replace the spare fuse with one of the appropriate size and rating and close the compartment.

9.Re-install the power cord.

APPENDIX A

SPECIFICATIONS

1000RPSM-2 and 1000RPSM-V (AC Front Cards):

Power Supply: 120V AC or 220-24V AC, switchable

Input Voltage: “120V AC” setting: 100-130V AC; “220V AC” setting: 200-240V AC

Maximum Input Current: “120V AC” setting: 400mA; “220V AC” setting: 200mA

Isolation Voltage: Model 1000RPSM-2: 1.5 kV AC;

Model 1000RPSM-V: 5 kV AC

Output Voltage: 10V AC @ 2.4 A

Output Power: 24VA

Switches: Power on/off

LED Indicator: Power

1000RPEM and 1000RPEM-V (AC Rear Cards):

Connection: IEC-320 Shrouded Male

Fuse: 120V AC: 5x20mm, 400mA, Time-Delay; 240V AC: 5x20mm, 200mA, Time-Delay

9 10