Interface Settings, Block Diagram | Patton electronic 1012ARC

APPENDIX D

INTERFACE SETTINGS

Contact Number	Circuit	Description

1	N/A	Not Used
2	125	DSR
3	109	Received Line Signal Indicator
4	108 / 2	DTE Ready
5	102	Signal Common
6	104	Received Data
7	103	Transmitted Data
8	106	Clear to Send
9	105 / 133	Request to Send / Ready for Receiving
10	N/A	Not Used

Pins 2-9 conform to the EIA/TIA-561 eight position non-synchronous interface standard.

APPENDIX E

Patton Electronics Company

Image 10

Contents

User Manual CE Notice ServiceRadio and TV Interference Monday through Friday Setting the RTS/DCD Straps FeaturesMoving the Configuration Straps Description Interface Card Strap Summary Table #1 Rear Card ConfigurationRear Card Strap Settings JB5 Sgnd & Frgnd JB6 & JB7 DTE as DSR or RI Rack Power SupplyModel 1000R16 Rack Chassis Terminal Interface Connection Installing the Model 1012ARC Into the ChassisSignal PIN# Color ‡ Twisted Pair Connection Host First Slave Second Slave Multipoint Twisted Pair ConnectionLED Status Monitors RTS/CTS Delay 40mS POWER-UPSpecifications Temperature Range 0-50C32-122F Cable Recommendations Wire Gauge Capacitance ResistanceFactory Replacement Parts Data Rate Bps Gauge AWG / Distance Mi Up to 38,400 Patton Modular Interface 8/10 Wire RJ-45 Interface SettingsBlock Diagram