Patton electronic 1093 PATTON ELECTRONICS MODEL INTERFACE PIN ASSIGNMENTS Continued, Pin #

Models: 1093

1 13

Page 13

APPENDIX C

INTERFACE PIN ASSIGNMENTS

(Continued)

(DB-15 Female Connector)

(DTE /DCE Configuration)

Patton Electronics Company

Image 13

Contents

MODEL USER MANUALKiloModem-512TM High Speed Baseband Modem1.1 RADIO AND TV INTERFERENCE 1.3 SERVICE1.2 CE NOTICE TEL 301 Email support@patton.com3.1 EXTERNAL DIP SWITCH SETTINGS 2.1 FEATURES2.2 DESCRIPTION REARSwitches S1-1 and S1-2 Clock Source 3.1.1 Switch Set S1Switches S1-3 RTS/CTS Delay Switch S1-4 LDL Control3.1.2 Switch Set S2 Switch S1-8 V.54 Enable / Disable4.1.1 TWISTED PAIR CONNECTION USING RJ-45 SIGNALInstalling the New QuickConnect Module RJ-45 Cable 4-WirePIN# 4.2 CONNECTION TO THE SERIAL PORT4.3 CONNECTION TO THE POWER SOURCE 4.2.4 RECONFIGURING THE X.21 QUICKCONNECT MODULE4.3.1 AC POWER CONNECTION 4.2.2 CONNECTION TO A “DTE” DEVICE5.3 DIAGNOSTICS 5.1 POWER-UP5.2 LED STATUS MONITORS 5.3.1 LOCAL ANALOG LOOPBACK LAL5.3.2 REMOTE DIGITAL LOOPBACK RDL NOTE LDL will only work when S1-4 is ON5.3.3 LOCAL DIGITAL LOOPBACK LDL Diagnostics PATTON ELECTRONICS MODEL1093 SPECIFICATIONSLED Indicators PowerAlways use twisted pair wire-this is not an option Wire GaugeAPPENDIX C PATTON ELECTRONICS MODEL FACTORY REPLACEMENT PARTS AND ACCESSORIESPin # SignalPATTON ELECTRONICS MODEL INTERFACE PIN ASSIGNMENTS Continued X.21 Interface DB-15 Female Connector DTE /DCE ConfigurationSignal S/ Signal Element Timing-B