Patton electronic 2158 user manual

DC power (supplied via the power supply jack to the CopperLink Ether- net Extender) must meet the following requirements; DC power supplied must be regulated +5VDC ±5%, 1.0A minimum. Center pin is +5V. The barrel type plug has a 2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.

The CopperLink Ethernet Extender does not have a power switch, so it

powers up as soon as it is plugged in.

There are no user-serviceable parts in the Copper- Link Ethernet Extender.Fuse replacement should only be performed by qualified service personnel. Contact Patton Electronics Technical support at (301) 975-1007 for more information.

WARNING

13