APPENDIX B
CABLE RECOMMENDATIONS
The Patton Model 2500RC Series operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using
Wire Gauge | Capacitance | Resistance |
19 AWG | 83nf/mi or 15.72 pf/ft. | .0163 Ohms/ft. |
22 AWG | 83nf/mi or 15.72 pf/ft. | .0326 Ohms/ft. |
24 AWG | 83nf/mi or 15.72 pf/ft. | .05165 Ohms/ft. |
To gain optimum performance from the Model 2500RC Series, please keep the following guidelines in mind:
•Always use twisted pair
•Use twisted pair wire with a capacitance of 20pf/ft or less.
•Avoid twisted pair wire thinner than 26 AWG (i.e. avoid higher AWG numbers than 26)
•Use of twisted pair with a resistance greater than the above specifications may cause a reduction in maximum distance obtainable. Functionality should not be affected.
•Many environmental factors can affect the maximum distances obtainable at a particular site. Use the above data rate/distance table as a general guideline only.
APPENDIX C
FACTORY REPLACEMENT PARTS
AND ACCESSORIES
Patton Model # | Description |
DDS Cable, RJ48 - RJ48, 6 foot | |
Control Port Cable, | |
Adapter, | |
Adapter, | |
082R2 | Fuse 5x20mm, 200mA, 250V, |
| Little Fuse P/N 239.200 |
1000RPEM | 120/240V Rear Power Entry Module |
120/240V Front Power Supply Module | |
DC Rear Power Entry Module | |
48V Front Power Supply Module | |
120/240V CE Compliant Rear Power | |
| Entry Module |
120/240V CE Compliant Front Power | |
| Supply Module |
0805US | American Power Cord |
0805EUR | European Power Cord CEE 7 |
0805UK | United Kingdom Power Cord |
0805AUS | Australia/New Zealand Power Cord |
0805DEN | Denmark Power Cord |
0805FR | France/Belgium Power Cord |
0805IN | India Power Cord |
0805IS | Israel Power Cord |
0805JAP | Japan Power Cord |
0805SW | Switzerland Power Cord |
39 | 40 |