Ethernet 44
IpLink 2884/2888 Getting Started Guide C • Cabling
Ethernet

Ethernet devices (10Base-T/100Base-T/1000Base-T) are connected to the IpLink over a cable with RJ-45

plugs. All Ethernet ports on the IpLink 2884/2888 are Auto-MDX use any straight or crossover cable to con-

nect to hubs, switches, PCs or other devices.

Figure 12. Typical Ethernet straight-through cable diagram for 10/100Base-T

Figure 13. Typical Ethernet straight-through cable diagram for 1000Base-T

The interconnecting cables shall be acceptable for external use

and shall be rated for the proper application with respect to volt-

age, current, anticipated temperature, flammability, and

mechanical serviceability.

CAUTION

Hub
RJ-45, male
1
2
3
6
RJ-45, male
1
2
3
6
Straight-through cable
Note: Other pins are not used.
RJ-45, male
1
2
3
6
4
5
7
8
RJ-45, male
1
2
3
6
4
5
7
8