Patton electronic IM2RC/F Ce Notice, Service, Telephone 301, email support@patton.com, Features

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Telephone: (301) 975-1007;

Web Address: http://www.patton.com;

email: support@patton.com.

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your

Model IM2RC/F. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of this product, please contact Patton Electronics Technical Support at: (301) 975-1007.

2.1 FEATURES

•Designed for use with Patton Electronics short range modem access products that receive Patton’s Rear Card modules and support 64k/128k synchronous data rates

•Compliant with ITU-T G.703 electrical specifications

•120 ohm RJ-45 Network Termination

•Complies with ITU-T G.823 Jitter Control Specifications

•Supports Clear Channel or Octet Timing Modes

•Built-in Transformer Isolation and Surge Protection

•Supports Network or Modem Timing

•Fits in Patton’s 2u (3.5”) rack chassis and cluster boxes

•Made in the U.S.A.

2.2 DESCRIPTION

The Patton Model IM2RC/F is a rack-mountable rear card that provides Patton baseband modems with an interface to the G.703 PCM network. With the IM2RC/F you can achieve high speed G.703 network extension, dedicated high speed internet access, remote LAN access,...the possibilites are endless! Supporting 64 kbps clear channel or 128 kbps octet mode data streams, the IM2RC/F can set its own clock or it take clocking from the G.703 network.

The Model IM2RC/F meets baseband modem function cards such as 1092ARC, 1045RC and 2500RC in the mid-plane of Patton’s 2U (3.5”) rack chassis. G.703 access is accomplished via a 120 Ohm RJ- 45 jack. 2 or 4 Wire twisted pair Line connections are made via a second RJ-45 jack.

The Model IM2RC/F features on-board transformer isolation and surge protection as well as compliance with ITU-T G.823 Jitter Control Specifications.

3 4