Appendix a, Network Data Rate | Patton electronic MODEL 2707/I

APPENDIX A

G.703 SPECIFICATIONS

A.1 NETWORK DATA RATE

2.048 Mbps

A.2 NETWORK CONNECTOR

RJ-48C/Dual Coax BNC

A.3 NOMINAL IMPEDANCE

75/120 ohm

A.4 LINE CODING

Selectable AMI or HDB3

A.5 LINE FRAMING

G.703 (Unframed)

A.6 CLOCKING

Internal or Network (Receive Recover)

A.7 DISTANCE

Maximum 6,000 ft (1.6 km) On 24 AWG cable

20

Image 20

Patton electronic MODEL 2707/I Appendix a, Network Data Rate, Network Connector, Nominal Impedance, Line Coding, Clocking

Contents

User Manual Warranty Information ConfigurationInstallation Specifications Factory Replacement Parts and Accessories Warranty Information ServiceRadio and TV Interference CE NoticePage Description FeaturesGeneral Information PPP Operational Background Applications Model 2707/I Model 2707/C Router Internet Ethernet LAN Front Rear ConfigurationDIP Switch Configurations Switch S1 settings Switch Description SettingSW1-1 Line Coding HDB3 default SW1-1 Line EncodingPage Installation Connecting to the G.703 Network and Ethernet LAN Connecting Dual Coaxial Cable 75 ohm to the G.703 Network From Connecting the Twisted Pair 120 ohm to the G.703 Network Network Signal PIN#Signal Name Connecting the 10Base-T Ethernet port to a PC DTE 10Base-T Port 10Base-T Hub RJ-45 Pin No Connecting the 10Base-T Ethernet Port to a Hub10Base-T Port 10Base-T DTE RJ-45 Pin No To Power Supply Jack LED Status Monitors POWER-UPOperation LED Device Operating Line Loopback LL703 NTU Model 2707/I Mbps G.703 Network Connector Appendix aNetwork Data Rate Nominal Impedance Diagnostics IndicatorsAppendix B DTE Interface Power Supply TemperatureDimensions Humidity Appendix C Patton Model # Description Copyright Patton Electronics Company All Rights Reserved