A-2 Specifications
Charging Time: Approximately 3 hours with no
printing
Communications: RS-232 port
Print Ratio 25% black maximum per square
inch
Supply Specifications Supplies: Thermal direct receipt paper
Supply
Thickness:
2.2 to 3.5 mils (receipt paper)
Supply Width: 3.125 inches (79 mm)
Supply Length: 1.0 inch (25.4 mm) minimum feed
8.0 inch (203 mm)
1 roll of receipt paper is
approximately 600 inches
(15,240 mm)
Supply Sensing: Black mark (on the face of the
supply)
Roll Diameters: Inside: .25 inches (6 mm)
Outside: 1.5 inches (38 mm)
Maximum Print
Area:
2.85 inches (72 mm) by 8.0 inches
(203 mm)
NOTE: Maximum length depends
on format.
Options ♦ Magnetic Card Reader (factory-installed)
♦ Printer Stand (120611)
♦ Belt Clip (120296)
♦ Monarch Single Station Battery Charger
(can be wall-mounted)
♦ Monarch Four Station Battery Charger