Paxar 6017 T t e r y a n d S a f e t y I n f o r m a t i o n, Install i n g t h e B a t t e r y

B a t t e r y a n d S a f e t y I n f o r m a t i o n

The printer is powered by a 7.4V Lithium Ion (LiIon) battery. There are no memory effects with LiIon batteries and reconditioning is not required. Lithium ion batteries do not have to be completely drained before charging.

♦Charging time is approximately 1.5 to 3 hours.

♦Take the battery out of the printer when storing the printer for long periods of time.

♦The battery storage temperature is 40°F to 104°F (4°C to 40°C). Do not store a fully charged battery at temperatures greater than 104°F (40°C) for long

periods of time. The battery may permanently lose charge capacity.

♦Be sure to use a fully charged battery before long or battery-intensive printing sessions. Certain operations (for example, printing receipts with a lot of bar codes and graphics) drain the battery more quickly than others.

♦Disposal information – Do not throw in trash. Dispose according to your local regulations.

CAUTION

Do not disassemble, short circuit, heat

above 80°C, or incinerate. The

battery may explode.

♦The recommended temperature for charging is 68°F (20°C) to 77°F (25°C).

I n s t a l l i n g t h e B a t t e r y

One battery is included with the printer.

Similar to a cordless phone battery, the printer’s battery must be charged before using it.

1.Remove the handheld. (This step is optional.)

2.Turn over the printer.

1-2Getting Started