C o n f i g u r i n g t h e S c a n n e r
The scanner may already be configured to work with your ADK script. If not, use these bar codes to configure the scanner:
Reset to default values.
Enable the communications port.
Set the communication port to match the keyboard’s settings.
Set the minimum bar code width (if necessary).
For additional bar codes to program your scanner, refer to your scanner’s Installation and User’s Guide for more information.
E n a b l e t h e C o m m u n i c a t i o n s P o r t
The communications port must be enabled before the scanner and keyboard can communicate with each other. To enable the communications port, scan the following series of bar codes, one at a time, from top to bottom.
This section is not necessary if using Version 2.3 or greater of the Keyboard’s software.
Configuring the System
