Connecting the Scanner’s Cables
A scanner is optional for the keyboard. You need to connect the
cable to the scanner and keyboard before you can use it. The
scanner receives power through the keyboard. For more
information about the scanner or other peripheral devices, refer to
their User Manuals.
1. Turn OFF the printer before you connect the scanner’s cable.
2. Reach into the bottom of the keyboard’s base and locate the
keyboard’s auxiliary serial port, which is on a short, straight
cable as shown.
3. Slide the cable into the slot on the keyboard’s base.
4. On the scanner, connect the RJ45 male connector end of the
cable into the scanner. You will hear it click into place.
5. Connect the other end (9-pin male) of the cable to the
keyboard’s auxiliary serial port (9-pin female).
6. Tighten the screws on the cable to secure the scanner cable
to the auxiliary serial port.
Cable
Slot
Auxiliary
Serial Port
Scanner
Cable
Keyboard Cable
to Printer
Getting Started 1-5