Paxar 939 manual Number of Parts

3.Decide if you want to see this prompt in Batch Entry mode and press either l or r to display your selection. Press N.

Quantity

1 _ _ _ _ _ _ _ _

4.Decide if you want to change the default (1) for the quantity of tags to print in a batch. Enter a quantity (1-32000). Press N.

After setting the batch options, you are ready to use Batch Entry mode to enter data for your formats. See Chapter 3, "Entering Batch Data," for more information.

Keep in mind the following definitions:

Number of Parts	Number of times data prints across the tag’s
	width. Using one for number of parts prints
	data once on the tag. Using three for number
	of parts prints data three times across the tag.
Cut Multiple	Number of tags printed between cuts as a
	set. A cut multiple of one cuts after each tag.
	To cut after each batch, set the cut multiple
	equal to the print quantity.
	If the cut multiple is three and the print
	quantity is 15, five sets of three tags are
	printed and cut (15 tags). If the cut multiple
	is three and the print quantity is 16, five sets
	of three tags and one set of one tag are
	printed and cut (16 tags).

Note: The cut multiple does NOT affect the printed quantity.

2-6Setting Batch Options