G E T T I N G S TA R T E D | 1 |
The Monarch® 932™ stacker works with a Monarch® 9860™ printer. The stacker supports backfeed mode on the printer. There is no power ON/OFF switch for the stacker. Once the stacker is plugged into an outlet, it is on.
U n p a c k i n g t h e S t a c k e r
uImportant: After unpacking the stacker, look through all packaging material for parts. Keep all packaging material for future shipping.
I n s t a l l i n g t h e S t a c k e r
Use these instructions when you first install the stacker or when you need to move the stacker to a different location.
Before installing:
uFind a level work surface at least 52" x 22" (1321 mm x 559 mm).
The 9860 printer comes with a knife attached.
uTurn off the printer before you install the stacker.
Getting Started
