68 Removing and Installing Parts
Installing a Hard Drive
1
Unpack the replacement hard drive, and prepare it for installation.
2
Check the documentation for the drive to verify that it is configured for your computer.
3
Remove the hard drive bracket (see page66).
4
Attach the hard drive to the hard drive bracket:
a
Place the small bracket tabs into the drive screw holes on one side of the drive.
b
Gently swing the drive toward the bracket and align the two screw holes on the other side of the
drive with the screw holes on the bracket.
c
Insert and tighten the two screws that secures the hard drive to the hard drive bracket.
5
Install the hard drive bracket containing the hard drive:
a
Insert the two bracket tabs into the two bracket securing slots inside the computer.
b
Rotate the bracket toward the front panel and align the bracket screw hole with the screw hole in
the chassis.
c
Replace the two screws that secure the bracket to the computer.
drive bracket
hard drive
bracket screws (2)
bracket tabs (2)