Dell B110, 1100 Installing a Floppy Drive, Top bracket screw Drive bracket Floppy drive

2Remove the floppy drive bracket from the computer:

a Remove the bracket-securing screw for the floppy drive.

b Remove the bracket for the floppy drive from the computer.

securing screws (4)

top bracket screw

drive bracket

floppy drive

3Remove the floppy drive from the bracket:

a Remove all four drive-securing screws (two on each side). b Remove the floppy drive from the bracket.

Installing a Floppy Drive

1Remove the floppy drive bracket from the computer (see page 71).

2If you are replacing a floppy drive, remove the drive from the bracket (see page 71).

3Attach the floppy drive bracket to the floppy drive:

a Align the screw holes on the drive with the screw holes on the bracket. b Insert and tighten all four drive-securing screws (two on each side).

4Position the top of the floppy drive bracket so that it is completely flush with the bottom of the upper drive bay, and then slide the floppy drive bracket forward into position.

NOTE: The top of the floppy drive bracket has two slots that fit into two clips on the bottom of the upper drive bay. When the floppy drive bracket is properly mounted, it remains in place without support.

Removing and Installing Parts

71