8To insert a module, press out the securing clip at each end of the memory module connector.

memory connector closest to microprocessor

securing clips (2)

connector

9Align the notch on the bottom of the module with the crossbar in the connector.

notch

memory module cutouts (2)

crossbar

NOTICE: To avoid breaking the memory module, do not press near the middle of the module.

10Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

Removing and Installing Parts

57

Page 57
Image 57
Dell B110, 1100 owner manual Securing clips Connector, Notch, Crossbar