76 Removing and Installing Parts
4
After the drive is in place, apply pressure to ensure that the drive is fully seated.
5
Use the securing screw that came with the drive to attach the drive to the computer.
NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
6
Connect the power cable to the system board (see page54).
7
Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data
connector to the new drive.
drive
alignment screws (2)
securing
screw
extra alignment
screws (2 or 4)
power cable
first CD/DVD
connector
(primary drive)
second CD/DVD connector
(secondary drive)