Paxar TC6037EM manual I N G S U P P L I E S, A d i n g S u p p l i e s

U S I N G S U P P L I E S 3

The printer can use three types of supplies:

♦Labels

♦Tags

♦Receipt Paper

There are two print modes. The way you load the supplies depends on the print mode you use.

♦Peel mode removes the backing paper from the supplies as it prints the labels. This mode allows you to apply the label immediately. It is only for labels. If you have purchased and selected the on-demand sensor, you must press the trigger between labels. Otherwise, the next label prints only when the previous one is applied.

♦Non-Peel mode does not remove the backing paper. It is for labels printed in a continuous strip, tags, and receipt paper.

L o a d i n g S u p p l i e s

To load supplies:

1. Turn on the printer. The application starts running.

2. Maneuver to the point in the application where you are prompted to load the supplies.

Using Supplies 3-1