PC Concepts TU2-400 manual Installation

INSTALLATION

Installation of the USB Hub is easy. Self- Powered mode is available for you to install the USB Hub. Each downstream port is 500mA (max) supplied. This power is sufficient enough to support most of the USB devices.

1.Plug the DC end of the power adapter into the DC jack of the Hub.

2.Plug the AC end of the power adapter into an electronic outlet.

3.Plug the B-type plug of USB 2.0 cable into the “upstream port” of the Hub.

4.Plug the A-type plug of USB 2.0 cable into the PC site.

-4 -