Peavey 110 EFX Footswitch not included, Power Switch, Mode Select, EFX Select Mode

This control adjusts the overall reverb level. The surrounding LED ring indicates level.

(16) DELAY

This control adjusts delay type, time, and volume. Three types of delay are available: SLAP (1 repeat), ECHO (3

-4 repeats), or INFINITE (5 - 6 repeats). The LEDs in each section of the control indicate which type is active and volume level. Pressing the control twice sets the delay time to interval between presses.

(17) POWER SWITCH

Press the switch to the “ON” position to apply power to the unit.

MODE SELECT

Footswitch (not included)

EFX

SELECT

MODE

18 19

CHANNEL	MODULATION	DELAY
		REVERB

	PFCTM3	2		3
1 DOUBLE-CLICK
PRESET	TO STORE PRESET		PRESET		PRESET
20	21	22	23	24	25

The PFC 3 footswitch operates in two modes: EFX Select mode and Preset Select mode. Pressing the MODE SWITCH (18) selects between the two modes. The active mode is indicated by the MODE LED (19). Illumination of the LED indicates EFX Select Mode; a dark LED indicates Preset Select Mode. Controls and indicators 20-25 perform different functions relative to the active mode.

EFX SELECT MODE

NOTE: When entering this mode, the current preset will remain active.

In this mode, PRESET 1 (20) selects between the Lead and Clean channels. The CHANNEL LED (21) will illuminate when the Lead channel is active. PRESET 2 (23) toggles between two effects and their respective settings. This switch may be used as an on/off switch if one of the settings has no effects active. To use the MODULATION LED

(22)as a status indicator, the “off” (or lower setting) should be made with the LED dark, and the “on” (or higher setting) made with the LED illuminated. PRESET 3 (25) toggles between two reverb and delay settings. As with effects settings, this switch may be used as an on/off for reverb and delay. Both functions change simultaneously when this switch is depressed.

PRESET SELECT MODE

In this mode, all three switches control effects presets. Their corresponding LEDs indicate which preset is active. Once desired settings are achieved utilizing the effects controls on the front panel, double-click one of the Preset switches (15, 23, or 25) to store the settings. To return to the last saved settings for a Preset, press the desired Preset switch once.

For a detailed explanation on creating and storing presets, refer to the TWEAK FEATURES section of this manual on the following page.

7