Peavey 2443/3243 user manual Rear Panel

45.LEFT/RIGHT LEVEL DISPLAYS These indicators graphically display the signal level being sent to the Left or Right outputs (L, R). Signal is sampled at the summing amp and post-master faders to monitor clipping throughout the Left/Right and Mono Master section. The Clip indicator will illuminate when signal approaches clipping (-2 dB).

46.MONO — AFL/PFL LEVEL DISPLAY This indicator graphically displays the signal level being sent to the Mono output. When any AFL/PFL switch on the mixer is activated, this display indicates the signal level being sent to the AFL/PFL bus. The AFL/PFL indicator flashes if either mode (AFL or PFL) is selected.

NOTE: Clip LED can illuminate before the rest of the array indicating the summing amp is clipping.

47.MONO MASTER FADER This control determines the level of the output signal sent to the Mono output. An adjacent switch allows a post-fader signal to be sent to the Headphone Output and the AFL/PFL Level Display. A yellow LED above the switch indicates AFL (post-fader) engagement.

48.L & R MASTER FADERS These controls determine the level of the signal sent to the Left and Right outputs respectively. As with all faders, the optimum setting is at unity gain (0).

52

Rear Panel

MONO	RIGHT	LEFT
INSERT	INSERT	INSERT
(TRS)	(TRS)	(TRS)
49
(UNBAL)	(UNBAL)	(UNBAL)
50
MONO	RIGHT	LEFT
OUT	OUT		OUT
51
(BAL)	(BAL)	(BAL)
57
POWER
58		100V	-240V
	50/60 Hz		70 WATTS

RETURN 1

RIGHT	MONO/
	LEFT
RIGHT	MONO/
	LEFT
RETURN 2
(UNBAL)	(UNBAL)
AUX 6	AUX 5
OUT	OUT

COMP4 COMP3 COMP2 COMP1					53
I/O	I/O	I/O	I/O
				L
T=IN	T=IN	T=IN	T=IN
R=OUT	R=OUT	R=OUT	R=OUT
(UNBAL)	(UNBAL)	(UNBAL)	(UNBAL)	R
SUB 4	SUB 3	SUB 2	SUB 1	M	54
OUT	OUT	OUT	OUT		55
(UNBAL)	(UNBAL)	(UNBAL)	(UNBAL)
AUX 4	AUX 3	AUX 2	AUX 1
OUT	OUT	OUT	OUT
(BAL)	(BAL)	(BAL)	(BAL)
					56

49.L, R, MONO INSERT These 1/4" stereo (TRS) jacks, provided on the Left, Right, and Mono channels, allow an external device to be inserted into the signal path, pre-master fader. The tip carries the signal being sent and the ring is the signal return. A switch in the jack connects the send to the return if no plug is inserted. The signal must be returned to this jack when this feature is used. Failure to return the signal will result in no output.

50.L, R, MONO UNBAL (UNBALANCED OUTPUT) These 1/4" jacks allow output of an unbalanced signal and are provided for the Left, Right, and Mono channels.

51.L, R, MONO BAL (BALANCED OUTPUT) These XLR connectors allow output of a balanced signal and are also provided for the Left, Right, and Mono channels. The unbalanced and balanced outputs can be used simultaneously, but both output levels are controlled by the corresponding Master fader.

52.RETURN INPUTS These 1/4" balanced (TRS) high-impedance inputs can be used as stereo or individual returns. Designed for effects return, they can also be used as additional stereo inputs. The Mono/Left input provides signal to both inputs if no connector is attached to the Right jack. The tip is the positive input for both balanced and unbalanced use.

53.COMPRESSOR I/O (INPUT/OUTPUT) These 1/4" stereo (TRS) jacks allow the internal compressors for each Sub group to be patched to an input channel or to an external device. The tip carries the input (return) signal to the compressor and the ring carries the output (send).

54.SUB OUT These 1/4" (TRS) unbalanced outputs provide signal from the Sub groups.

10