Peavey 3000 manual Optional Mixer Stand Assembly

Optional Accessories (available from Peavey dealers)

Microphone stand(s)

Additional microphones and cables

Microphone wind screens

Additional speaker cables in various lengths

Additional speaker stands in various heights

Audio cables for CD and tape

Optional Mixer Stand Assembly:

Remove the mixer stand from the case. The mixer stand consists of three parts: two pairs of legs and the stand cross-members (Fig. 1). Hold the stand cross-member with the leg sockets together as shown (Fig. 2). Fully insert one set of legs into the cross-members (Fig. 3). Still holding the cross members together, set the legs on the floor and insert the second pair of legs. If you need to move the stand, carry it folded by holding the legs.

NOTE: For Safety, be sure to fully open the mixer stand and place it on a level surface.

	Fig. 3
Fig. 2

Fig. 1

12