ENGLISH
Congratulations on your purchase of the all new Revolution® 112 TransTube® Series amplifier. This amp represents years of research on vacuum tube emulation and channel switching configurations, resulting in a totally new TransTube package. The preamp has been designed using technology that redefines
The T™ Dynamics circuitry simulates tube power amp compression. This, in combination with reso- nance and presence circuitry, yields the closest tube amp simulation to date. This compression effect is increased by turning the T™ Dynamics control down, which lowers the power level of the amp.
Using the Revolution® 112 with an external 8 ohm speaker, like our 112 SX, increases the power from 80 to 100 watts. The footswitchable channel selection and the footswitchable effects loop allow for greater flexibility in performance.
1 2 3 4
6
7 | 8 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 |
|
| 23 | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 | 9 | 13 | 21 |
FRONT PANEL
FRONT PANEL FEATURES
HIGH GAIN INPUT (1)
Used for most electric guitars. It is 6 dB louder than Low Gain input.
LOW GAIN INPUT (2)
Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).
VOLUME (3)
Controls the volume level of the Clean channel.
BRIGHT SWITCH (4)
Provides a preset boost (6 dB) to treble frequencies. To activate, depress the switch to its “in” position.
CHANNEL SELECT SWITCH (5)
Allows selection of the Ultra or Clean channel. The “in” position of the switch selects the Ultra channel and the “out” position selects Clean.
NOTE: Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the channel switch must be in the “in” position.
LOW, MID, AND HIGH EQ (6)
Passive tone controls that regulate the low, mid, and high frequencies of the Clean channel.
3
