BACK PANEL
24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BACK PANEL FEATURES
GROUND SWITCH (24)
Three position
Note: Should the noise problem continue, consult your Authorized Peavey Dealer, the Peavey Factory, or a qualified service technician. THE GROUND SWITCH IS NOT FUNCTIONAL ON 220/240 VOLT MODELS.
AC LINE CORD—120 V PRODUCTS ONLY (25)
For your safety, we have incorporated a
necessary to use the equipment without proper grounding facilities, suitable grounding adaptors should be used. Less noise and greatly reduced shock hazard exists when the unit is operated with the proper grounded receptacles.
(For UK Only) As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
•The wire which is coloured green and yellow must be connected to the terminal which is marked by the letter E or by the earth symbol, or coloured green or green and yellow.
•The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
•The wire which is coloured brown must be connected the terminal which is marked with the letter L or the coloured red.
EXTERNAL SPEAKER JACK (26)
Provided for connection of external speaker cabinet. Minimum external speaker impedance is 8 ohms. Use of an external 8 ohm speaker boosts amp output to 100 watts.
REMOTE FOOTSWITCH JACK (27)
Provided for the connection of the supplied remote footswitch. The footswitch is used to select the Ultra, Lead, or Clean channel and bypass the EFX Loop. When using remote footswitch, always insert the plug fully (second click) to ensure proper operation. The proper footswitch is Peavey part number 90000019.
POWER AMP INPUT (28)
Used to connect Line Level signal to the power amplifier.
5
