CA-A540Bª and CA-A800Bª SPECIFICATIONS
Characteristics: |
|
|
Output Power 1, 2, 3: |
|
|
2 Channel Mode, Stereo |
|
|
4 ohms, 1 kHz at 1% THD | 450 W RMS per channel | 700 W RMS per channel |
8 ohms, 1 kHz at 1% THD | 270 W RMS per channel | 400 W RMS per channel |
Bridge Mode, Mono |
|
|
8 ohms, 1 kHz at 1% THD | 900 W RMS | 1400 W RMS |
Rated Output Power 1, 2: |
|
|
4 ohms, 20 Hz to 20 kHz, 0.15% THD | 400 W RMS per chan | 625 W RMS per chan |
8 ohms, 20 Hz to 20 kHz, 0.1% THD | 240 W RMS per chan | 370 W RMS per chan |
Slew Rate 3: |
|
|
Stereo Mode, each channel | 20 volts per uSec. | 20 volts per uSec. |
Bridge Mode, mono | 40 volts per uSec. | 40 volts per uSec. |
Total Harmonic Distortion 2, 3: |
|
|
20 Hz to 20 kHz at rated output, 8 ohms | Less than 0.07% | Less than 0.07% |
Input Sensitivity and Impedance 4: |
|
|
At rated output power, 8 ohms | 1.0 V RMS, 0 dBV | 1.4 V RMS, +3 dBV |
Balanced inputs | 6.8k ohms per leg | 6.8k ohms per leg |
Overall system gain per channel | 32.5 dB | 32.5 dB |
Frequency Response 2, 3: |
|
|
±1dB, 1 W RMS, 8 ohms | 10 Hz to 40 kHz | 10 Hz to 40 kHz |
±0.2 dB, at rated output, 8 ohms | 20 Hz to 20 kHz | 20 Hz to 20 kHz |
Damping Factor 2, 3: |
|
|
8 ohms, 1 kHz | Greater than 300 | Greater than 300 |
Hum and Noise 1, 2: |
|
|
Below rated output power, 8 ohms | 100 dB, unweighted | 100 dB, unweighted |
Power Consumption 2: |
|
|
At rated output power, 8 ohms | 10.3 A at 100 VAC | 15.2 A at 100 VAC |
| 8.6 A at 120 VAC | 12.7 A at 120 VAC |
| 4.3 A at 220 VAC | 6.4 A at 220 VAC |
Cooling System: | ||
SPS Compression System: | Switchable with LED | Switchable with LED |
Dimensions and Weight: |
|
|
Height: | 5.25" (13.3 cm) | 7" (17.8 cm) |
Width: | 19" (48.3 cm) | 19" (48.3 cm) |
Depth: | 15" (38.1 cm) | 15" (38.1 cm) |
Weight: | 45 lbs. (20.5 kg) | 55 lbs. (25.0 kg) |
Notes:
(1)@ 120 VAC, 60 Hz (2) Stereo mode, both channels driven (3) Typical value (4) Input attenuator set FCW
9