Peavey Cirrus manual Construction, D y, C k, Pickups

Construction

B o d y

The body of this instrument is offered in two versions of the finest woods available in a three piece grain matched Mahogany or a Walnut with Bubinga Top. The deep double cutaway design provides unimpelded access to the highest fret while the extended upper horn balances the instrument, thereby avoiding the need to support the instrument with the left hand. The Cirrus features our hand-rubbed oil/ultra satin finished.

N e c k

The neck is available in Walnut with a wedge finger- board (Graphite Reinforced) both 4 and 5 string models are equipped with a two away adjustable steel Torsion Rod. A 12" radius; 24" fret and 34" scale. Fingerboard on 4 string model, 15" radius; 24 fret and 35" scale fin- gerboard on 5 string model.

Pickups

Each Cirrus instrument comes equipped with two inter- nally active VFL™ pickups. The low impedance output increases the amount of signal-to-noise and produces a brilliantly strong signal over a wide frequency spec- trum. The sensitivity level of each pickup may be adjusted by raising or lowering the pickup with height adjustment screws. Raising the pickup closer to the strings will increase sensitivity and lowering the pickup (away from the strings) will decrease the sensitivity.

4