SPECIFICATIONS

Output Power: (typical value)

(@ 120 VAC, 60 Hz)

Stereo mode, both channels driven:

2 ohms, 1 kHz, 1% THD: 900 W RMS per channel

4 ohms, I kHz, 1% THD: 600 W RMS per channel

8 ohms, 1 kHz, 1% THD: 350 W RMS per channel

Bridge mode. mono:

4 ohms, 1 kHz, 1% THD: 1800 W RMS

8 ohms, 1 kHz, 1% THD: 1200 W RMS

Rated Output Power:

(@ 1 2 0 V A C , 6 0 H z )

Stereo mode, both channels driven:

4 ohms, 20 Hz to 20 kHz, 0.04% THD: 550 W RMS per channel

8 ohms, 20 Hz to 20 kHz, 0.04% THD: 300 W RMS per channel

Power Bandwidth: (typical value)

Stereo mode, both channels driven

@ rated power, 4 ohms, ~0.1% THD: 10 Hz to 40 kHz

Slew Rate: (typical value)

Stereo mode, each channel: 40 volts per pSec

Bridge mode, mono: 80 volts per ySec

Total Harmonic Distortion: (typical)

Stereo mode, both channels driven:

20 Hz to 20 kHz, 4 ohm rated load: Less than 0.04%

Input Sensitivity & Impedance:

Input attenuator set @ FCW:

@rated output power, 4 ohms: 1 .O V RMS (0 dBV), 20 k ohms (+33 dB)

Frequency Response: (typical value)

Stereo mode, both channels driven:

+0,-l dB, 1 W RMS, 4 ohms: IO Hz to 40 kHz

+O, -0.2 dB @ rated output, 4 ohms: 20 Hz to 20 kHz

Damping Factor: (typical value)

Stereo mode, 8 ohms, I kHz: Greater than 300

Hum & Noise:

Stereo mode, below rated power, 4 ohms: 100 dB, unweighted

Power Consumption:

Stereo mode, both channels driven:

@rated output power, 4 ohms: 13 A @ 120 V AC,

6.8 A @ 230 V AC

Cooling System:

Dual 2 speed fans

DDTTM Compression System:

Switchable with LED

Dimensions & Weight:

Height: 3.50” (8.9 cm)

Width: 19” (48.3 cm)

Depth 17” (43.2 cm)

Weight 35 lbs. (15.9 kg)

Two Rack Space, Class BG, Dual Rail Design With NSSER Topology

(NSSER: non-saturating series single emitter resistor)

Patent Pending.

Due to our efforts for constant improvements,

,features and specifications listed herein are subject to change without notice.

9

Page 8 Page 10
Page 9
Image 9
Peavey CS 1800G Output Power typical value, Rated Output Power, Power Bandwidth typical value, Slew Rate typical value
Page 8 Page 10

CS 1800G specifications

The Peavey CS 1800G is a powerful and versatile professional power amplifier that is well-suited for a wide range of audio applications. Known for its robust construction and high-quality sound output, the CS 1800G stands out in the Peavey lineup, making it an ideal choice for touring musicians, DJs, and audio engineers alike.

One of the main features of the CS 1800G is its impressive power output, delivering 900 watts per channel at 4 ohms in stereo mode, and up to 1800 watts in bridged mono mode. This substantial power ensures that the amplifier can drive even the most demanding speakers while providing clear and dynamic sound reproduction across various performance settings.

The CS 1800G incorporates Peavey's proprietary TransTube technology, which enhances the amplifier's ability to provide warm, tube-like tones. This feature has been engineered to deliver a richer tonal character compared to many traditional solid-state amplifiers, giving performers and sound engineers more flexibility in crafting their sound.

In terms of its technical design, the CS 1800G comes equipped with advanced protection circuitry, ensuring the amplifier remains safe from overheating, short circuits, and other potential hazards that could affect performance. Additionally, the unit features comprehensive LED indicators that provide essential feedback on performance status, including signal presence and clip indicators.

The amplifier’s rear panel offers a variety of connectivity options, including balanced XLR and ¼-inch inputs, as well as Speakon and binding post outputs. This flexibility allows for easy integration into any audio system, making it suitable for both live sound applications and installation environments.

Weighing in at 22.4 pounds, the CS 1800G strikes a balance between portability and power, making it manageable for transport without compromising on performance quality. This durable build is complemented by a rugged metal chassis, designed to withstand the rigors of touring and professional use.

Overall, the Peavey CS 1800G is a reliable and powerful amplifier that combines cutting-edge technology, robust performance, and user-friendly features, making it a top choice for anyone in search of high-quality audio amplification. Whether for concerts, events, or permanent installations, the CS 1800G delivers the performance and flexibility needed for diverse audio needs.
Top Page Image Contents