27
Power Requirements:
Domestic: 120V AC~, 60 Hz, 50W
Export: 100V AC~, 50/60 Hz, 50W
230V AC~, 50/60 Hz, 50W
Included Accessories:
IEC Line Cord
(4) 12 position Phoenix-type connectors
(1) 3 position Phoenix-type connector
Dimensions and Weight:
3.5" H x 19" W x 11.69" D
(excluding connectors)
13.7 lbs.
Category 5 cable length
Maximum 1,000 ft
Note: Standard Òdata typeÓ cable is used;
however, there is voltage on the line.
DO NOT connect to computer networks.
Station Four-W Mounting
Station 4-W Wallmount does not come with a back panel.
It is recommended to use a standard 4 Gang Electrical box with
these dimensions: 3.75" H x 7.5" W x 2.0" (Min) D.
Maximum Input Level:
Station 4 Wallmount: -22 dBu
Station 4 Desktop: -22 dBu
Station 10 Desktop: -22 dBu
Maximum Output Level:
Station 4 Wallmount: +25 dBu
Station 4 Desktop: +25 dBu
Station 10 Desktop: +25 dBu
Input Impedance:
Station 4 Wallmount: 2.2K ohms
Station 4 Desktop: 2.2K ohms
Station 10 Desktop: 2.2K ohm
Output Impedance:
Station 4W Wallmount: 200 ohms
Station 4 Desktop: 200 ohms
Station 10 Desktop: 200 ohms
Frequency Response:
Station 4 Wallmount: 20Hz to 20 kHz (+0, -2 dB)
Station 4 Desktop: 20Hz to 20 kHz (+0, -2 dB)
Station 10 Desktop: 20Hz to 20 kHz (+0, -2 dB)
Total Harmonic Distortion:
Station 4 Wallmount:Less than 0.01% at 1 kHz
Station 4 Desktop: Less than 0.01% at 1 kHz
Station 10 Desktop: Less than 0.01% at 1 kHz
Signal-to-Noise Ratio:
Station 4 Wallmount: Greater than 88 dB
Station 4 Desktop: Greater than 85 dB
Station 10 Desktop: Greater than 84 dB
Phantom Power:
Station 4 Wallmount: +48V DC
Station 4 Desktop: +48V DC
Station 10 Desktop: +48V DC
Power Requirements:
Station 4 Wallmount: 48mA at +24V DC
Station 4 Desktop: 55mA at +24V DC
Station 10 Desktop: 92mA at +24V DC
Dimensions:
Station 4 Wallmount: 4.5" H x 8.2" W x 1" D
Station 4 Desktop: 4.0" H x 5.2" W x 7.1" D
Station 10 Desktop: 4.0" H x 10.4" W x 7.1" D
5.6. Specifications