Peavey PageMatrix specifications Features, Applications, Operation, Specifications

S P E C I F I C A T I O N S

PAGEMATRIX™

STATION

FOUR BUTTON

Features

•Four Zone preset

•3-pin XLR low-Z mic input

5-pin XLR Aux Mic input Electronically balanced

•Mic level control +25 dBu full scale

•Electronically balanced output

Applications

•Transportation Centers

•Convention Centers

•Theme Parks

•Industrial Plants

•Medical Centers

•High Rise Facilities

•Research Facilities

•Hotels and Resorts

•Casinos

Operation

5LED color indicates status of each of the four zone presets.

5 Green indicates the zone is available.

5 Red indicates the zone is in use.

5When the microphone “Push to Talk” button is pressed, the selected zone preset LED turns orange to confirm that it is active. Other stations connected to the system will indicate RED to confirm that the zone preset is in use.

5Press any zone preset button to select. The LED will blink, confirming the selection.

5At power-up, the unit defaults to zone one, and after one minute of inactivity reverts back to zone one.

5Hand-held 5-pin mic input is activated by pressing the “talk” button.

5Zone presets can be labeled in the appropriate white boxes.

5If all LEDs flash red at power-up, this is an indication that the station has not been programmed.

5If all LEDs flash green at power-up, this is an indication that the station has beenprogrammed.

5The Aux mic input (rear panel) is always routed to zone preset one.

Specifications

Maximum Input Level:

-22 dBu

Maximum Output Level:

+25 dBu

Input Impedance:

2.2K Ohms

Output Impedance:

200 Ohms

Frequency Response:

20 Hz to 20 kHz (+0, -2 dB)

Phantom Power:

+48V DC

Signal-to-Noise Ratio:

Greater than 85 dB

Power Requirements:

55mA at +24V DC

Total Harmonic Distortion:

Less than 0.01% at 1 kHz

Dimensions:

4" H x 5.2" W x 7.1" D 10.16cm x 13.21cm x 18.03cm

ARCHITECTURAL ACOUSTICS®