microphone the AUDIO LED indicators will illuminate according to the strength of sound level. If the LEDs do not illuminate or sound is not present at the output, the system is not functioning properly and must be checked.
4.Receiver and Amplifier Volume Adjustment:
a.Single-channel Unbalanced Audio Output: Switch the level switch on the rear panel of the receiver to the left “LOW” Position, then adjust the volume control to twelve o’clock position. Adjust the volume control of the amplifier or mixer to an appropriate sound level. The volume control is used for fine adjustment of the microphone sensitivity. When the knob is turned to the twelve o’clock position the output sensitivity level of the wireless microphone is the same as a normal dynamic microphone. Once the receiver output level is appropriately adjusted, do not adjust the volume control again. Adjust the mixer or amplifier volume control if the sound level needs to increase or decrease.
b.Balanced Output: Adjust according to the unbalanced audio output method in the previous step. (Note: The level switch does not effect the balanced output.)
c.To obtain the same sensitivity level when using a wireless microphone and a wired microphone with one amplifier or mixer connect both the receiver output and the wired output to a “MIC-
10
