Peavey PFC 10 MIDI/Remote Out Jack, Rear Panel Descriptions, Power Supply, View Angle Adjustment

PFC'" 10 Professional MIDI Foot Controller

View MIDI/ Control

Angle Remote Voltage

Adjust OutJcd Jarits

4.0REAR PANEL DESCRIPTIONS

1.Power Supply

Required when using a 5-pin MIDI cablewith MIDIequipment otherthan theTube FexorTransFex 212.

Use onfy the 16-16.5volt AC 1,000 mA adaptor, Peavey part#70900660, available as an option.

Caution: Use only the optional16.5 volt power supply for this product. If the (optional) power supply must be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure to use the correctpowersupply could resultin fire,shock hazard,extensive circuitdamage,decreased performance, and/or non-operation.

2.View Angle Adjustment

This adjusts the view angle of the LCD display to provide the most comfortable viewing angle.

3.MIDI/Remote Out Jack

Used when connecting to an effects unit. Use a standard 5-pin MIDI cable with effects units other than the Peavey Tube Fex or TransFex 212. When using the Tube Fex or TransFex 212, use the 8-pin MIDI cable provided.This willallow you to usethe PFClO ProfessionalMID Foot Controller’s "intelligent" operation, and it will connect the PFC 10 to the Phantom power supplied from the Tube Fex or

TransFex 212.

4.Control Voltage Jacks

The CC6jacktransmits Controller 6 when used with a CV pedal or potentiometer. Use the CC7jackto transmit Controller 7 (volume) when used with a CV pedal or potentiometer.

Peavey Electronics Corporation