Peavey pRP 7 owner manual Rear panel, Pedals

Rear panel

1

2

3 4

5

6

1.MIDI IN/OUT:These ports allow the instrument to be connected to other MIDI devices.

	Midi In allows the sounds of the pRP7 to be played by an external controlling device
	e.g. a controller keyboard or a sequencer.
	Midi Out sends MIDI information from the pRP7 to other MIDI external equipment.
2. PEDALS:	Two pedal connectors (Damper and Soft) for optional switch-action pedals.

3.INPUT RIGHT/M-LEFT:These two stereo inputs are used to connect another instrument to the pRP7. The output of the other instrument will be mixed with the main signal of the pRP7 and sent to the Output and Headphone jacks. If you are connecting a mono signal, then you should use only the Right/Mono jack.

4.OUTPUT RIGHT/M-LEFT:These two stereo outputs are used to connect the instrument to another amplifier, mixer or recording device. If you are connecting to mono equipment, (e.g. a guitar amplifier), then you should use only the Right/Mono jack.

5. PHONES: Plug a set of stereo headphones into this jack for private listening.

6.12 V DC, POWER ON/OFF: Connection for the power supply unit. Use only the unit supplied with your instrument.

Press the switch to turn the instrument on and off.

4