E.When installing or de-installing the speaker on the stand, it is a good practice to have a helper if possible, as it can be hard to “thread the needle” and mate the stand cup to the stand pole while holding the PV®115D speaker system at arm’s length. It is also helpful if someone holds the speaker stand and pole down while the PV®115D is removed from the stand pole- this prevents the PV®115D from pulling the pole up with it.

F.When using stands outdoors, never attach banners or flags to the stands or the PV®115D speaker system, as strong winds may cause the speaker to blow over. If there is a possibility of windy conditions, then it may be prudent to consider weighting or locking down the stand legs to prevent the PV®115D speaker system from being blown over.

TROUBLESHOOTING

No Output at All

First, make sure the unit has AC power and is turned ON. Make sure the Power/Clip LED (9) is illuminated Green. If not, make certain the ON/OFF switch (3) is in the ON position and check the IEC power cord connection (2) by ensuring it is fully engaged and seated. Make certain the AC line cord is plugged into a working AC outlet. Finally, check the fuse (2a). (See the Rear Panel: Fuse section for safety instructions.)

Once assured your unit is getting AC power, check that the PV®115D is getting a signal. Temporarily disconnect the cable running to its inputs and connect it to some other device capable of reproducing the signal (i.e., a power amp and speaker). If this produces a signal, make sure that all Volume controls being used have been turned up to a satisfactory level (one-third to halfway).

If the PV®115D has been subjected to direct sunlight or excessive heat, the built-in thermal protection may have been triggered. The power/clip LED will be illuminated RED if this is the case. If so, turn off the PV®115D and let it cool for a sufficient amount of time.

If there is still no output, contact your authorized Peavey dealer or the Peavey International Service Center.

Hum or Buzz

If the PV®115D is producing a hum or buzz, this can be AC outlet related. Try plugging the PV®115D into a different AC outlet. Sometimes, if a different AC power circuit (breaker) is used for the mixer and the PV®115D, it can cause hum problems.

Ensure that shielded cables have been used to route the signal to the PV®115D’s inputs. If speaker cables with 1/4” plugs are used as input cables instead of shielded cables, they will be prone to hum or buzz.

The third wire (ground plug) on the AC plug should NEVER be removed or broken off.

Hum may be ground loop related. It may be helpful to lift the shield ground on a balanced cable at the PV®115D end only by disconnecting the cable shield at the plug. Check any input changes carefully by first turning down the level control before plugging and unplugging cables or changing the grounding.

Check to make sure light dimmers are not on the same circuit as the PV®115D, the mixer or any source devices. If light dimmers are used, then it may be necessary to turn them full ON or full OFF to eliminate or reduce hum. This is a typical AC wiring/light dimmer interference problem, not a design flaw of the PV®115D.

Distorted or Fuzzy Sound

First, ensure the mixer (signal source) is not clipping or being overdriven. Make sure the level control (6) on the PV®115D has not been set too low.

Check that the input plugs are fully seated in the input jack (5) on the rear panel of the PV®115D.

Ensure that a power amp output has not been plugged into the input jack (5) of the PV®115D.

If an extension cord is being used to provide the AC power to the unit, ensure that it is of sufficient current capacity and that it is not also being used to supply power to any other device.

The PV®115D has a Contour switch (7) to provide boost of the bass and of the treble for low playback levels. If excessive additional bass boost or high frequency boost have been added externally to the PV®115D while the Contour switch is engaged, it could cause premature overload at high SPL. Switch the Contour button OFF, which is the out position, and reduce the amount of any external (mixer, rack) EQ and see if that clears up the distortion.

21

Page 20 Page 22
Page 21
Image 21
Peavey PV115D manual Troubleshooting, No Output at All, Hum or Buzz, Distorted or Fuzzy Sound
Page 20 Page 22

PV115D specifications

The Peavey PV115D is a powerful and versatile active loudspeaker designed for various applications, from live performances to DJ events and public speaking engagements. With its robust construction and innovative features, this speaker offers a professional sound experience tailored to meet the demands of today’s audio environments.

One of the standout features of the PV115D is its 15-inch heavy-duty woofer, which is designed to deliver deep and accurate bass response. This is coupled with a 1.4-inch titanium diaphragm compression driver that produces crystal-clear highs, ensuring that vocals and instrumentation are reproduced with stunning clarity. The combination of these components enables the speaker to handle a wide frequency range, making it suitable for diverse musical genres and audio content.

The PV115D is equipped with an onboard 300-watt peak power amplifier, which provides adequate headroom for high-volume applications. This built-in amplification eliminates the need for external amplifiers, simplifying setup and reducing gear complexity. Additionally, the speaker features a built-in EQ with preset configurations, allowing users to tailor the audio output to suit specific environments and preferences.

For connectivity, the PV115D includes multiple input options, such as XLR and 1/4-inch TRS inputs, making it compatible with a wide range of audio sources. The speaker also features a microphone input with dedicated volume control, enabling easy integration into live setups where vocal reinforcement is needed.

Durability is a hallmark of the PV series, and the PV115D is no exception. It is housed in a sturdy, textured polypropylene enclosure designed to withstand the rigors of transport and use in various settings. Moreover, the speaker is equipped with a robust, perforated metal grill that protects the drivers while allowing for optimal sound dispersion.

Another advantageous aspect of the PV115D is its lightweight design, which makes it easier to transport and set up. Its integrated handles enhance portability, allowing users to move it with ease, whether for rehearsals, gigs, or events.

In conclusion, the Peavey PV115D is a feature-rich active loudspeaker that offers exceptional sound quality, efficient performance, and robust construction. With its powerful amplifier, versatile connectivity options, and tailored sound shaping, it stands out as an ideal choice for audio professionals and enthusiasts alike.
Top Page Image Contents