STEREO MODE
DDT Compression
To left speakersshould be enabled for system protection
TM
To right speakers |
| Mode switch must be |
|
| in stereo position |
BRIDGE MODE
| DDT Compression | |
System Load | should be enabled for | |
system protection | ||
4 ohm minimum | ||
| ||
| TM |
Mode switch must be in bridge position
TWO-CHANNEL MONO MODE
Connect to first |
|
| Connect to second | ||||
set of speakers |
|
|
| set of speakers | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TM
Mode switch must be in stereo position
Left Output 
from Mixer
Can be used as outputs to chain to other power amp units
Right Output 
from Mixer
Output |
from Mixer |
Not Used |
DDT Compression should be enabled for system protection
Output |
from Mixer |
Connect |
Channel A |
to Channel B |
WARNING!
For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS!
Using one speaker, it must be rated at 2 ohms minimum.
Using two speakers, they must be rated each at 4 ohms minimum.
Using three speakers, they must be rated each at 8 ohms minimum.
AVIS!
Pour assurer la Fiabilte et obtenit une performance optimale, ne soumette jamais l'amplificateur a une charge d'impedance totale inferieure a 2 ohms, ni avec un H.P. ni en combinaison des H.P.
AVEC un H.P., il Faut une charge d'impedance minimum de 2 ohms.
AVEC deux H.P., il Faut pour chaoun une charge d'impedance minimum de 4 ohms.
AVEC trois H.P., il Faut pour chaoun une charge d'impedance minimum de 8 ohms.
8
