Peavey PV 35XO Low-Midgain Control, CROSSOVER SELECTOR CONTROL mids/high-mids15, Mode Switch

10 12 14 16

8 9 11 13 15

LOW-MID GAIN CONTROL (8)

This controls the output level of the low-mid frequency signal (signal above the selected low/low-mid crossover point and below the selected low-mid/mid crossover point) present at low-mid output XLR.

HIGH GAIN CONTROL (Channel 1) (9)

This function is non-operational in MONO mode.

OUTPUT MUTE SWITCHES (Channel 1) (10)

This mutes the output of the associated level controls for lows and low-mids signals.The Mute function will be indicated by the illumination of the red LED located above the associated switch.

MODE SWITCH (11)

This switch selects between stereo 3-way operation and mono 5-way operation.The red LED above Mode switch indicates mono mode.When the switch is engaged, the crossover is in mono operation.

SUBS OUT SUMMED SWITCH (12)

This function is non-operational in MONO mode.

INPUT GAIN CONTROL (Channel 2) (13)

This function is non-operational in MONO mode.

CLIP INDICATOR (Channel 2) (14)

This function is non-operational in MONO mode.

CROSSOVER SELECTOR CONTROL (mids/high-mids) (15)

This allows users to choose their desired crossover points for the high side of the mids and the low side of the high-mids.The control range is between 80 Hz and 900 Hz or 800 Hz and 9 kHz, depending on the position of the Range switch.

RANGE (x10) SWITCH (mids/high-mids) (16)

This switch multiplies the value indicated on the Crossover Selector control for the high side of the mids and the low side of the high-mids times 10.When engaged, the range will change from 80 Hz - 900 Hz to 800 Hz - 9 kHz. Range x10 is indicated by the illumination of the red LED above the switch.

13