Peavey QW 1 specifications SPECIFICATIONS QW-1

SPECIFICATIONS QW™-1

Frequency response, 1 meter on-axis, swept-sine in an anechoic environment:

200 Hz to 18 kHz (±3 dB)

Usable low frequency limit (-10 dB point):

150 Hz

Power handling: Full Range:

600 Watts continuous

1200 Watts program

2400 Watts peak

Mid Frequency Section: 600 Watts continuous 1200 Watts program 2400 Watts peak High Frequency Section: 100 Watts continuous 200 Watts program 400 Watts peak

Sound pressure level, 1 Watt,

1 meter in an anechoic environment: Full Range:

101 dB SPL, (2 Volt input)

Mid Frequency Section:

101 dB SPL, (2 Volt input)

High Frequency Section:

111 dB SPL, (2.83 Volt input)

Maximum sound pressure level (1 meter):

Mid Frequency Section: 129 dB SPL continuous 135 dB SPL peak High Frequency Section: 131 dB SPL continuous 137 dB SPL peak

Radiation angle measured at -6 dB point of polar response:

500 Hz to 1.6 kHz: Horiz. 65˚ +/- 15˚ Vert. 60˚ +/- 15˚

1.6kHz to 5 kHz: Horiz. 40˚ +/- 5˚ Vert. 45˚ +/- 15˚

5 kHz to 16 kHz: Horiz. 50˚ +/- 5˚ Vert. 30˚ +/- 5˚

Directivity factor, Q (Mean): 22.28 ±9.65

Directivity index, Di (Mean): 13.10 dB ±1.81 dB

Transducer complement: Mid Frequency Section: 2x 10" woofers BWX 1008-8 HE

High Frequency Section:

1x 1.6" exit/100 mm voice coil compression driver on Quadratic Throat Waveguide™ 44XT™ (without adapter) on CH®-642QT horn

Harmonic distortion: 1% rated power Second Harmonic:

200 Hz:	0.50%
1 kHz:	0.98%
Third Harmonic:
200 Hz:	1.40%
1 kHz:	0.55%

10% rated power Second Harmonic:

200 Hz:	0.70%
1 kHz:	3.15%