Peavey Special 212 manual Specifications, 5% THD, 1 kHz, 120 V AC line, Hz to 20 kHz un weigh ted

SPECIFICATIONS

Rated Power & Load:

Power specs measured with T. Dynamics @ 100%

130 W RMS into 8 ohms

220 W RMS into 4 ohms

Power @ Clipping: (typically)

(5% THD, 1 kHz, 120 V AC line)

130 W RMS into 8 ohms

220 W RMS into 4 ohms

Frequency Response:

+O, 3 dB, 60 Hz to 20 kHz,

@ 100 W RMS into 8 ohms

Hum 81 Noise:

Greater than 86 dB below rated power

Power Consumption:

Domestic: 600 W @ 60 Hz,

120 VAC

Export: 600 W @ 50/60 Hz,

220-2301240 V AC

PREAMP SECTION

The following specs are measured @

2 kHz with the controls preset as follows:

Push Bright, Off (out) Channel Select Normal (out) Low& High @ IO

Mid @ 0

Resonance & Presence @ 0 dB Pre & Post Gain @ IO

Gain 6: Thrash, Off (out) Normal Levels are with normal

volume @ 5

Minimum Levels are with normal volume @ IO

Shift, Off (out)

Bottom, Body, & Edge @ 0 T-Dynamics @ 100%

Preamp High Gain Input:

Impedance: High-Z, 1 M ohm

Nominal Input Level: -24 dBV, 60 mV RMS

Minimum Input Level: -34 dBV, 20 mV RMS

Maximum Input Level: 0 dBV, 1 VRMS

Preamp Low Gain Input:

Impedance: High-Z, 44 k ohms

Nominal Input Level: -18 dBV, 120 mV RMS

Minimum Input Level: -28 dBV, 40 mV RMS

Maximum Input Level: 6 dBV, 2 V R M S

Effects Send:

Load Impedance: 1 K ohm or greater

Nominal Output Level: -10 dBV,

0.3V RMS or 0 dBV, 1 V RMS if Effects Level is in

Effects Return:

Impedance: High-Z, 18 K ohms

Designed Input Level: -10 dBV,

0.3V RMS or 0 dBV, 1 V RMS if Effects Level is in

(Switching jack provides Effects Send to Effects Return connection when not used)

Preamp Output:

Load Impedance: 1 K ohm or greater

Nominal Output Level: 0 dBV, 1 VRMS

Power Amp Input:

Impedance: High-Z, 50 K ohms

Designed Input Level: 0 dBV, 1 VRMS

(Switching jack provides preamp output to power amp input connection when not used)

System Hum & Noise @

Nominal Input Level:

(20 Hz to 20 kHz un weigh ted)

72 dB below rated power

Equalization:

Special Low, Mid, & High passive type EQ

Special Bottom, Body, & Edge EQ

Push Bright: +6 dB @ 2 kHz

Push Shift: Shifts Ultra Channel Body Frequency

Push Thrash: -20 dB notch @ 1 kHz in Lead channel

Push Gain: Increases Lead or Ultra gain

Resonance: +6 dB @ cabinet resonance

Presence: +6 dB @ 5 kHz

External Footswitch Functions:

Lead/Ultra Select (when

Channel Select button is in)

Clean Bypass

Effects Loop Bypass

Dimensions 81 Weight:

20.75” H x 26.625” W x 11.75” D 64.8 Ibs.

R.O.C. Invention Patent No. 072727

Due to our efSorts,for constant improvements,

,feutures and specifications LiJ ted herein are subject to charge without notice.

6