Peavey ST Series rear panel legend, LT / ST shown, input connection, 1IEC power connector

LT / ST shown
2	3	4	5	6

1

rear panel

1IEC power connector

Accepts a standard IEC terminated power cable

2Breaker

Resettable circuit breaker - no fuses are used. Breaker can trip due to a power surge or over-voltage condition. If it trips once, reset it. If it continues to trip, the amplifier may need servicing.

3Fan

The fan operates continuously while the amp is on. An internal temperature sensor increases the speed of the fan during high temperature conditions. Air enters through the rear of the

amp and exits through the front grill. Be sure to allow adequate air flow from the rear of the rack the amp is mounted in.

7

rear panel legend

input connection

XLR connector polarity TRS connector polarity

bridged mono mode parallel mode stereo mode

chassis ground lifted-position chassis ground grounded-position

output connection

speakon output

channel A stereo/parallel channel B stereo/parallel bridged mono

five-way binding post channel A stereo/parallel

bridged mono

channel B stereo/parallel

p.12