Peavey 48, VR112, VSX 26 manual Amplifier Level Settings, VSX presets, VSX26 presets

Amplifier Level Settings:

Sensitivity set at –10 dB is recommended when using Peavey CS series amps. All channels set to the same voltage gain, referenced to the 12” woofer)

Crest power amps should be used with the sensitivity setting in the x20 position and the attenuators fully clockwise (wide open)

Please review our white paper on minimizing system noise when using VSX on our website

VSX presets:

A VSX 26 may be used to provide a conventional 2 channel/stereo three way control of any Versarray System. The VSX 48 should be selected when it is desirable to control the system in “zones” that may be used to split coverage between balconies and a main floor or when shading of EQ or Level is desired. The added control provided by the VSX 48 gives the user additional capabilities to fine tune the system. The VSX 48 presets also provide an easy means to use an “aux fed sub” system (see our white paper … http://www.peavey.com/support/technotes/)

VSX26 presets:
Input A to	out 1 – subs
	out 2 – mids
	out 3 – highs
Input B to	out 4 – subs
	out 5	– mids
	out 6	– highs