Zephyr ZMIM90AG Change Reminder, Charcoal Filter, Features & Controls, Filter Replace Indicator

Change Reminder

www.zephyronline.com

Charcoal Filter Change Reminder (charcoal filter, if installed)

When your hood is installed as a recirculating unit, it is fitted with a set of charcoal filters to purify exhaust and fumes from cooking, then re-circulates the air within the home. These charcoal filters are required to be replaced after every 120 hours of use. The charcoal filters should never be cleaned or placed in a dish washer.

The filter change reminder function in the microprocessor needs to be switched on. When switched on, the microprocessor will elapse and count usage time and indicate by a flashing C when charcoal filter replacements are needed.

– Charcoal Filter

Setting the Filter Change Reminder

When off, hold	for approximately 5 seconds.
The display will change from		(exhaust mode) to

C (recirculating mode) this indicates that the

elapse timer function is switched on and charcoal filters are used.

Filter Replace Indicator

When the display C starts flashing, the charcoal

filters need to be replaced.

Set Mode

hold 5 sec. display from < - > to < C >

C

ChangeSetModeFIlters

display < C > flashes

Features & Controls

Re-setting Function
Once filters are replaced, with hood off, press and
hold	the display will appear; hold for apprimately
5 seconds until C on displays disappears		.

The filter change reminder is now re-set and a new 120 hour elapse cycle is initiated.

C

To Reset

hold 5 sec. display from < C > to < >

C

12