Metal Filter Clean Reminder (metal mesh filter)
Whether your hood is installed as an exhaust or purifying unit, a set if metal mesh filters are fitted by the factory, These metal mesh filters are intended to filter out residue from cooking. They need not be replaced on a regular basis but are required to be kept clean. The filter clean reminder function in the microprocessor will automatically indicate by a flashing 
F
when the metal mesh filters need to be cleaned after every 30 hours of use. Filters can be cleaned by hand with
Filter Clean Reminder
Metal Filter Clean Indicator
When 
F
flashes on display, the metal filters installed are required to be cleaned. This will occur after every 30 hours of use.
Re-setting Function
Reset the filter clean reminder timer when filters are cleaned and
hold 
for approximately 5 seconds, the display will appear; hold for approximately 5 seconds until 
F 
on
display disappears | . The filter clean reminder |
function is now reset and a new 30 hours elapse cycle is initiated.
Clean Filters
display < F > flashes
F
To Reset
hold 5 sec. display from < F > to < >
F 
Features & Controls – Metal Mesh
13
