Peavey XR 600F owner manual Frequency Response, Total Harmonic Distortion THD, Graphic Equalizer

XR®	600F
Frequency Response:
Mic Input to L - R Output	20 Hz — 20 kHz +0 dB/-1 dB
Line Input to L - R Output	20 Hz — 20 kHz +0 dB/-1 dB
To Power Amplifier Output	20 Hz — 20 kHz +0 dB/-1 dB

Total Harmonic Distortion (THD):

<0.01% 20 Hz — 20 kHz mic input to L/R mon. output at nominal level (20 Hz — 80 kHz BW)

<0.01% 20 Hz — 20 kHz line input to L/R output at output at nominal level (20 Hz — 80 kHz BW)

<.005% Typical at 1 kHz

Graphic Equalizer:
Filter Bandwidth		1 octave
Filter Frequencies		63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 k
Maximum Boost and Cut		+12 dB Boost, -12 dB Cut
XR 600F Hum and Noise:
Output	Residual Noise	S/N Ratio	Test Conditions
	Ref: 0 dBu	Ref: 2 dBu
Main	-98 dBu	-100 dB	All controls down
	-89 dBu	-91 dB	One channel nominal, master
			nominal
	-81 dBu	-83 dB	Master level nominal,
			Channel level nominal, Mic
			Inputs terminated @ 150 ohms
Monitor	-96 dBu	-98 dB	All controls down
	-90 dBu	-92 dB	One channel nominal, master
			nominal
	-81 dBu	-83 dB	Master level nominal,
			Channel level nominal, Mic
			Inputs terminated @ 150 ohms

(Hum and noise measurements: 22 Hz to 22 kHz BW)

S/N Ratio:

> 85 dB below rated output (200 W/channel), mic/line to speaker output

Equivalent Input Noise (EIN):

-121.5 dBu (Input terminated with 150 ohms)

Crosstalk:

>80 dB Adjacent Input Channels (20 Hz — 20 kHz)

>70 dB Left to right outputs (20 Hz — 20 kHz)

Common Mode Rejection Ratio (Mic Input): 50 dB min. (20 Hz - 20 kHz)

60 dB typical @ 1 kHz