XR® 600F/400 SC AMPLIFIER SPECIFICATIONS
POWER SECTION | Hum and Noise: | ||
(400 SC Module with DDT™ ) | |||
Frequency Response: | Damping Factor: | ||
+0, | Greater than 100 @ 1 kHz, 4 ohms | ||
Rated Power: | Input Sensitivity: | ||
• | 210 watts RMS into 4 ohms, both channels | 1.5 V RMS for 210 watts @ 4 ohms | |
| driven |
|
|
• | 150 watts RMS into 8 ohms, both channels | Input Impedance: | |
| driven | 2 k ohms |
|
• | Bridge out 420 watts into 8 ohms* |
|
|
| *8 ohms minimum load for bridge output only | Power Requirements: | |
|
| 600 watts, 120 V AC, 60 Hz | |
Total Harmonic Distortion: |
|
| |
Less than .01% @ 1 kHz @ rated power | Dimensions: |
| |
|
| Width: | 19.125" |
DDT™ Dynamic Range: | Height: | 10.875" | |
Greater than 26 dB | Depth: | 11.0" | |
|
| Weight: | 35.2 lbs. |
DDT™ Maximum Distortion: |
|
| |
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
