5 of 20 ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09
Insert two M4 x 12 mm screws (A) into top two holes of
screen,leavingapproximately.25"(6mm)ofexposedthread.
Hook screws onto keyslots of adapter plate as indicated in
gures2.1and2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (B) with two retaining spacers (C) into top two holes of
screen as indicated right.
Insert two M4 screws (A or B) through bottom holes of adapt-
erplateasshowningure2.3.
2
g.2.1
• Ifscrewsdon’tgetthreecompleteturnsinthescreeninsertsorifscrewsbottomoutandbracketisstillnottightly
secured, damage may occur to screen or product may fail.
WARNING
1/4”
g.2.2
A
Screen may appear
slightlydifferent
thanillustrated
g.2.3
A or B
ADAPTER PLATE
C
*Forscreenswith
aholepatternina
pocket, spacers (C) go
between adapter plate
and screen.
FOR VESA® 75
MOUNTING PATTERN:
FOR VESA 100
MOUNTING PATTERN:
UsingVESA75or100mmMountingPatterns
ADAPTER
PLATE