WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
Note: To add security, order ACC 918 for security screws. Refer to ACC 918 instruction sheet for installing security screws.
2 | Insert two M4 x 12 mm screws (F) into top two holes |
of screen, leaving approximately 1/4" of exposed |
thread. Hook screws onto keyslots of adapter plate as indicated in figures 2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x
20mm screws (G) with two retaining spacers (H) into top two holes of screen as indicated right.
*For screens with a hole pattern in a pocket, spacers (H)
go between adapter H plate and screen.
F | 1/4" |
FOR VESA® 75 | FOR VESA100 |
MOUNTING PATTERN: | MOUNTING PATTERN: |
Screen may appear slightly different than illustrated
fig. 2.1 | fig. 2.2 | |
3 | Insert one M4 screw (F or G) through bottom hole of |
|
adapter plate as shown in figure 3.1. |
| |
ADAPTER
PLATE
F or G
fig. 3.1
6 of 24 | ISSUED: |
