2 | Remove knobs and M10 washers from top of |
| adapter plate assembly (A). |
KNOBS
M10 WASHERS
UPPER
ADAPTER PLATE
A
LOWER ADAPTER
PLATE
3 | Place projector tilt plate (F) onto projector and |
secure using four M4 x 8 mm socket pin serrated |
washer head screws (L). | L | |
| ||
| SHORT FLANGE | |
F | OPPOSITE THE | |
PROJECTOR | ||
| ||
| LENS |
FRONT OF
PROJECTOR
MOUNTING LOCATIONS
FRONT OF
PROJECTOR
4 | Secure lower adapter plate onto projector tilt plate (F) using four M6 x 10 mm socket pin screws (M). |
|
A | M |
|
F
| KNOBS |
| |
M10 | UPPER | UPPER ADAPTER | |
WASHERS | ADAPTER | ||
PLATE HOLES | |||
| PLATE | ||
|
|
LOWER
ADAPTER
PLATE
NOTE: MAKE SURE THAT
UPPER ADAPTER PLATE
HOLES ARE CENTERED
WITH PROJECTOR LENS
7 of 14 |