straps attached) into the leg divider strap until you hear a click (fig_a). To release, press the sides of the buckle and simultaneously pull the waist strap outwards (fig_b).
7To put on the safety harness, insert the strap adjuster into the slot in the backrest (fig_a) and remove it after fastening the harness to allow the child to move freely (fig_b). Place the strap adjuster just beneath child’s shoulder level so the shoulder straps do not slide off (fig_c). To tighten the waist strap, pull in the direction of the arrow on both sides (fig_d). To loosen it do the opposite. The waist
strap may be tightened up to the safety stop (fig_e).
8BACKREST ADJUSTMENT: to recline the backrest, lower the backrest adjuster (fig_a) and simultaneously push the backrest down (fig_b). To lift the backrest, push the backrest
adjuster up.
9 SWIVEL WHEELS: to make the front wheels swivel, lower the lever (fig_a). To fix them in place, lift the lever (fig_b).
10 BASKET REPLACEMENT: Should the basket need to be replaced, fasten it to the clips at the front (fig_a) and button it to the rear (fig_b).
11 WHEEL REMOVAL: the stroller wheels may be removed. To remove the front wheels, turn them to swivel position, push the levers (fig_a) and simultaneously push the wheel downwards until it is released (fig_b).
12 To remove the rear wheels, press the button (fig_a) and at the same time push the wheels down until they come off (fig_b).
13 FOLDING: before folding the stroller, close the hoods (if attached). To fold the stroller, lift the buttons on the sides of the handlebar (fig_a) and rotate the handlebar forward until it clicks. Push the backrest and the hoods towards the stroller and lower the handlebar until it slots into its housing (fig_b). Ensure the stroller is fully folded by checking
the safety fastener (fig_c). The stroller is freestanding when folded up.
14 TRANSPORT: thanks to the carrying handle, transporting the folded stroller is very simple.
15 REMOVABLE LINING: to remove the stroller lining, first remove the hoods, then the cover on the side (fig_a). Push the pin upwards and then outwards (fig_b), and finally slip it out of the eyelet in the sack (fig_c). Do this on both sides and in the middle.
16 To detach the sack from the seat, remove the leg divider strap from under the seat (fig_a), and unbutton it (fig_b). Unscrew the safety harness from both sides (fig_c) and slip the sack off the seat (fig_d).
GANCIOMATIC SYSTEM
Ganciomatic is the practical, fast system
for attaching the Primo Viaggio car seat to the stroller. The car seat is fitted with the Ganciomatic System, and is sold separately.
17STROLLER GANCIOMATIC FASTENERS: To raise the Ganciomatic fasteners on the stroller, pull the sack up in the seat corners and lift the two fasteners. They will automatically move outwards (fig_a). To lower the Ganciomatic fasteners, push them inwards and then down (fig_b).
18STROLLER + CAR SEAT: To fasten the car seat
to the stroller: set the brake on the stroller, remove the hood, completely lower the backrest and raise the Ganciomatic fasteners. Place the car seat, facing the adult, on the stroller and push down until it clicks into place. Do not remove the front bar from the stroller when attaching the car seat. See the car seat’s user manual for instructions on how to detach it from the stroller.
ACCESSORIES
19 RAIN COVER: transparent rain cover for the ARIA TWIN
20 CHANGING BAG: bag with pad for changing
the baby. Can be attached to the stroller.
SERIAL NUMBERS
21 The information about the date of production of ARIA TWIN
_Product name, date of manufacture and serial number of the product.
This information is essential in the event of any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and continuous exposure to bright sunlight may give rise to colour changes of various different materials; store this product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic parts with a damp cloth. Do not use solvent or similar cleaning products; keep all metal parts dry to prevent rusting; keep moving parts clean (adjustment mechanisms, locking mechanisms, wheels, ...) and free of dust and sand and, if necessary, lubricate with light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove dust and wash by hand at a maximum temperature of 30°C; do not wring; do not use chlorine bleach, do not iron; do not dry clean; do not apply
- 12 -
