Snap all 4 snaps back down on the seat pad. 36•To fasten the harness, check that the shoulder

straps are properly inserted in the waist strap, then click together the buckle of the waist strap and the leg strap. To unfasten the harness, press on the side of the buckle while pulling the waist strap upwards.

The new safety belt is easier to wear, thanks to the “snap open and shut” system. Before attaching the safety belt, attach the small buckle to the backrest by inserting the tab into the special holder, as shown in the figure. Next, fasten the safety belt on your child, and then detach the belt from the backrest to allow the child more freedom of movement. The small buckle should be placed below the child’s shoulders. To tighten the waist strap, pull on both sides in the direction of the arrow (fig_6). To loosen it do the opposite. The waist strap can be tightened as far as the safety lock.

FOLDING THE STROLLER/CARRIAGE

•Close the hood, if attached:

•Move the Skate-seat down to the lowest position. 37•If the Skate-seat is attached to the Skate chassis

facing parents, first pull out the safety trigger

(1)and simultaneously recline the Skate-seat by pulling up the handle behind the backrest (2), then align the seat to the Skate handlebar assembly (3).

38•If the Skate-seat is attached to the Skate chassis so that the child can see what's ahead, recline the Skate-seat by pulling up the handle behind the backrest and align the seat to the Skate chassis.

39•To close the Skate chassis when it is fully reclined, move the telescopic handlebar if extended to the lowest position. Press the folding pedal with a foot. Next pull the left trigger and then the right trigger.

40•now you will lower the handlebar down and rotate the handle grip down.

41•take out the locking levers and attach them to the side pins.

42•It stands on its own with the large wheels closest to the ground.

•To fold the Skate chassis in a compact way, remove the Skate-seat and wheels.

CARRYING THE STROLLER/CARRIAGE 43•There are two carrying modes. You can carry the

carriage/stroller either holding the handle under the basket or as a trolley; the handlebar must be long and straight and the front wheels in the non-swivel position.

Skate chassis + primo viaggio car seat

•Standard adapters allow to attach the Skate chassis to the car seat group 0+ "Primo Viaggio SIP" or "Primo Viaggio tri-fix" Peg Perego.

44•Before attaching the adapters, check that the two locking systems of the Skate chassis are in

the central and upright position.

•If you are standing behind the stroller pushing it, DX is the right side and SX is the left side.

45•To attach the adapters, place the locking systems in the holes of the Skate chassis.

46•To attach the car seat to the Skate chassis, place the seat facing parents next to the adapters and push it down so it attaches to the 2 adapter pins in the middle notches on the bottom of the car seat, The car seat can be adjusted to 3 height positions.

•To release the car seat from the Skate chassis, pull up the lever on the backrest of the car seat.

47•To remove the adapters, press the inside button and pull them upward.

accessory range

48•Skate bag: Multi-function bag, can be attached to the handlebar (A) and basket (B). Contains a nappy change mat and a removable thermal bottle holder.

removable lining

REMOVE THE OUTER LINING

•Remove the hood, cover and bumper bar if attached, and fully lower the backrest and legrest.

49•Unfasten the 2 buttons near the center of the unit on the inner padding from the outer lining.

•Unbutton the outer lining on both sides of the top from inside the Skate-seat.

50•Open the 3 zippers on the outer lining (1 at the bottom and 2 at the top of the Skate-seat).

51•On the outside of the Skate seat, unfasten the two elastic strings of the outer lining from the T shaped pins on both sides of the seat.

52•From inside the Skate-seat, first remove the upper part and then the side parts of the inner lining from the side pins.

53•Take out the outer lining from the Skate-seat, together with the backrest adjusting strap.

54•Move down the outer lining.

55•Unscrew the 6 pins from the bottom of the Skate-seat.

TAKE OUT THE INNER PADDING

•To take out only the inner padding, remove the outer lining without unscrewing the pins.

•If the safety belts are out, put them in the padding under the seat.

56•Take the 2 fixing tabs of the inner padding out of the Skate-seat.

57•Take the 4 fixing tabs of the inner padding out of the sides of the Skate-seat.

58•Take the backing of the Skate-seat out of the pocket behind the inner padding.

cleaning & maintenance

•This product requires some maintenance. Cleaning and maintenance operations must be carried out only by adults.

•You are recommended to keep clear all the

Page 17 Page 19
Page 18
Image 18
Peg-Perego SKATE manual Skate chassis + primo viaggio car seat, Accessory range, Removable lining, Cleaning & maintenance
Page 17 Page 19

SKATE specifications

The Peg-Perego SKATE is a remarkable stroller designed to cater to the needs of modern families, combining convenience, versatility, and style. This innovative stroller is perfect for parents who want an adaptable solution that grows with their child, and it makes navigating both urban and suburban landscapes a breeze.

One of the standout features of the Peg-Perego SKATE is its modular design. It allows for multiple configurations, accommodating infants and toddlers with ease. The stroller can be used with a car seat, bassinet, or as a traditional stroller seat, ensuring that it meets the needs of your growing child. The compatibility with Peg-Perego's Primo Viaggio car seat makes it a seamless travel system, providing parents with the option to transition from car to stroller without having to disturb their little ones.

Stability and maneuverability are hallmarks of the SKATE. Its larger rear wheels and front swivel wheels ensure smooth handling on various terrains, whether you are on a busy city sidewalk or navigating a bumpy park path. The adjustable handlebars cater to parents of different heights, making it comfortable for everyone to push.

Safety and comfort are prioritized in the design of the Peg-Perego SKATE. The stroller features a multi-position reclining seat that allows your child to sit up straight or lean back for a nap. Additionally, it is equipped with a five-point harness system, providing security for your child during your outings. The large canopy offers ample sun protection, shielding your little one from harmful UV rays while still allowing for ventilation.

Convenience extends to the SKATE's storage options as well. It comes with a generous shopping basket beneath the seat, enabling parents to carry diaper bags, groceries, or other essentials. The stroller also features a compact fold mechanism, making it easy to store and transport.

Furthermore, Peg-Perego emphasizes quality craftsmanship, with the SKATE being made in Italy using high-quality materials that ensure durability and longevity. Its stylish design does not compromise functionality, making it a fashionable yet practical choice for stylish parents.

In summary, the Peg-Perego SKATE is a versatile stroller packed with features that cater to the safety, comfort, and convenience of both parents and children. Its adaptability, stability, safety features, and stylish aesthetics make it an excellent choice for families on the go.
Top Page Image Contents