![](/images/new-backgrounds/1312310/31231015x1.webp)
Preset 95: Accessing the Main Menu
You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 in
Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers. Refer to the instructions shipped with your controller for more information.
CM6700/CM6800
1.Enter the number of the Spectra IV dome system and press the CAM key.
2.Enter 95 and hold the PRESET key for two seconds.
3.In the Edit Preset menu, go to SET and press the ACK key. The main menu appears.
KBD200A/KBD300A DIRECT MODE ONLY
1.Enter 95.
2.Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
CM9500
1.Enter the number of the Spectra IV dome system and press the CAM key. The main menu appears.
2.Highlight SETUP in the main menu and press the SELECT key.
3.Highlight CAM in the Setup menu and press the SELECT key.
4.Highlight PRESET in the Camera menu and press the SELECT key.
5.Enter 95 and press the F1 key. The main menu appears.
CM9740/CM9760/CM9770/CM9780
1.Press the ESCAPE key to open the main menu. Select DEF. The Define submenu appears.
2.Enter your
3.Enter 95 and select PRST. The main menu appears on the monitor.
4.Select the Quit icon to return to the default menu.
KBD4000/KBD4002
1.Press the SPOT MONITOR key.
2.Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
8 | C3462M (9/09) |